Product Overview
AEM Universal 12 Position Trim Pot
The Universal 12 Position Trim Pot is for use on virtually any Engine Management System, such as the AEM EMS. Use the Trim Pot to adjust a number of trims, including ignition timing, fuel, boost, etc. The Universal 12 Position Trim Pot includes: 12 Position Trim Pot with Flying Lead, 2 Brushed Silver Trim Position Decals with ranges from -5 to +6 and 0 to +11, Blue/Red/Black AEM Logo Knob Decals & Blue/Red/Black Colored Knob Decals.
- Can be used with virtually any engine management system
- Includes a weatherproof-over-molded flying lead that has 12-inch insulated, color-coded wires, two brush silver Trim Position decals, and black AEM logo adjustment knob
- Adjusts a number of trims, including ignition timing, fuel, boost, etc.
- 2 Position Trim Pot Performance Specifications:
- Total Resistance: 14.3KO
- Cycles Minimum: 10,000
- Positions: 12
- Degree Rotation: 330
- Mounting: 3/8" Hole
- Jam Nut: 1/2" Hex
- Knob Set Screw: 1/16" Allen
- Supply Current: 5 Vdc
- Output: .See table below
- Over mold weatherproof body with 12" leads, 1 Red (Supply Voltage 5Vdc +/- .5), 1 Black (Ground), 1 White (Output)
![AEM Water Temp Sensor Kit. 3/8"NPT. Includes: Water Temp Sensor, 3/8"NPT Aluminum Bung, Connector & Pins
Accuracy: < 2°C / 3.6°F
Operating Temp: -40C to 135C / -40F to 275F
Resistive Range (Ω): See Table
Dissipation Constant: 24 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
Thermal Time Constant: 20-30 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
Sensor Body Material: Brass
Thread: 3/8"-18 NPT
Hex Size: 3/4"
Installation Torque: 20Nm / 15 ft-lbs
Weight: 39.5g
Elec. Termination: Weatherproof connector. Includes mating connector, pins & wire seals
Includes: Water Temp Sensor, 3/8"-18 NPT Aluminum Bung, Connector, Pins & Wire Seals](https://cdn11.bigcommerce.com/s-e4pjjurlat/images/stencil/500x659/products/6374/3476/30-2011__43658.1593796245.jpg?c=2 "AEM Water Temp Sensor Kit. 3/8\"NPT. Includes: Water Temp Sensor, 3/8\"NPT Aluminum Bung, Connector & Pins
Accuracy: < 2°C / 3.6°F
Operating Temp: -40C to 135C / -40F to 275F
Resistive Range (Ω): See Table
Dissipation Constant: 24 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
Thermal Time Constant: 20-30 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
Sensor Body Material: Brass
Thread: 3/8\"-18 NPT
Hex Size: 3/4\"
Installation Torque: 20Nm / 15 ft-lbs
Weight: 39.5g
Elec. Termination: Weatherproof connector. Includes mating connector, pins & wire seals
Includes: Water Temp Sensor, 3/8\"-18 NPT Aluminum Bung, Connector, Pins & Wire Seals")
