Product Overview
AEM AQ-1 96" Flying Lead Wiring Harness
AEM has harnesses specifically designed for wiring its AQ-1 Data Loggers into your racecar. They feature weatherproof connections and labeled wires for ease of installation. AQ-1 wiring harnesses are available in 96" wiring lengths.
- Specifically designed to simplify wiring the AQ-1 Data Logger into a vehicle
- Color-coded wires are silk-screened with each function and bundled with identifiers for easy identification
- AQ-1 connector pre-wired for AEMnet, power/ground, CAN, RS232 Serial and remote USB
- Connector, plug, USB and wire seals are weather resistant
- AQ-1 OBDII wiring harness includes integrated OBDII connector
- Bag of 20 terminals included for populating inputs (Plug & Pin Kit only)
![AEM Water Temp Sensor Kit. 3/8"NPT. Includes: Water Temp Sensor, 3/8"NPT Aluminum Bung, Connector & Pins
Accuracy: < 2°C / 3.6°F
Operating Temp: -40C to 135C / -40F to 275F
Resistive Range (Ω): See Table
Dissipation Constant: 24 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
Thermal Time Constant: 20-30 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
Sensor Body Material: Brass
Thread: 3/8"-18 NPT
Hex Size: 3/4"
Installation Torque: 20Nm / 15 ft-lbs
Weight: 39.5g
Elec. Termination: Weatherproof connector. Includes mating connector, pins & wire seals
Includes: Water Temp Sensor, 3/8"-18 NPT Aluminum Bung, Connector, Pins & Wire Seals](https://cdn11.bigcommerce.com/s-e4pjjurlat/images/stencil/500x659/products/6374/3476/30-2011__43658.1593796245.jpg?c=2 "AEM Water Temp Sensor Kit. 3/8\"NPT. Includes: Water Temp Sensor, 3/8\"NPT Aluminum Bung, Connector & Pins
Accuracy: < 2°C / 3.6°F
Operating Temp: -40C to 135C / -40F to 275F
Resistive Range (Ω): See Table
Dissipation Constant: 24 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
Thermal Time Constant: 20-30 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
Sensor Body Material: Brass
Thread: 3/8\"-18 NPT
Hex Size: 3/4\"
Installation Torque: 20Nm / 15 ft-lbs
Weight: 39.5g
Elec. Termination: Weatherproof connector. Includes mating connector, pins & wire seals
Includes: Water Temp Sensor, 3/8\"-18 NPT Aluminum Bung, Connector, Pins & Wire Seals")
![AEM Air Temp Sensor DTM-Style Kit. Includes 1/8" NPT Air Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector & Pins
Weatherproof connector
Includes mating connector & pins
Senses the air temperature on the inlet side of the engine
Accuracy: < 1.5°C / 2.7°F
Operating Temp: -20C to 150C / -4F to 302F
Resistive Range (Ω): See Instructions
Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil
Sensor Body Material: Brass
Thread: 1/8" NPT
Hex Size: 1/2"
Installation Torque: 13.5Nm / 10 ft-lbs
Weight: 10g
Electrical Termination: Weatherproof High Performance DTM-Style connector. Includes Mating Connector, Pins & Wire Seals
Includes: Air Temp Sensor High Performance DTM-Style, 1/8" NPT Alumium Bung, Mating Connector, Pins & Wire Seals](https://cdn11.bigcommerce.com/s-e4pjjurlat/images/stencil/500x659/products/6377/7350/30-2014__43839.1593796385.jpg?c=2 "AEM Air Temp Sensor DTM-Style Kit. Includes 1/8\" NPT Air Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector & Pins
Weatherproof connector
Includes mating connector & pins
Senses the air temperature on the inlet side of the engine
Accuracy: < 1.5°C / 2.7°F
Operating Temp: -20C to 150C / -4F to 302F
Resistive Range (Ω): See Instructions
Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil
Sensor Body Material: Brass
Thread: 1/8\" NPT
Hex Size: 1/2\"
Installation Torque: 13.5Nm / 10 ft-lbs
Weight: 10g
Electrical Termination: Weatherproof High Performance DTM-Style connector. Includes Mating Connector, Pins & Wire Seals
Includes: Air Temp Sensor High Performance DTM-Style, 1/8\" NPT Alumium Bung, Mating Connector, Pins & Wire Seals")