Product Overview
AEM CAS Trigger Disk 54mm OD. NISSAN: Pulsar GTiR
AEM cam angle sensor discs are for use with AEM programmable engine management systems They are a direct replacement for the factory crank angle sensor disc in your Nissan. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor. Be sure to match the hubs of your disc to the AEM disc before ordering.
![AEM Fluid Temperature Sensor DTM-Style Kit. Includes 1/8" NPT Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector & Pins
Accuracy: < 1.5°C / 2.7°F
Operating Temp: -20C to 150C / -4F to 302F
Resistive Range (Ω): See Instructions
Dissipation Constant: 12 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
Thermal Time Constant: 10 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
Sensor Body Material: Brass
Thread: 1/8" NPT
Hex Size: 1/2"
Installation Torque: 13.5Nm / 10 ft-lbs
Weight: 10g
Electrical Termination: Weatherproof High Performance DTM-Style connector. Includes Mating Connector, Pins & Wire Seals
Includes: Water Temp Sensor High Performance DTM-Style, 1/8" NPT Alumium Bung, Mating Connector, Pins & Wire Seals](https://cdn11.bigcommerce.com/s-e4pjjurlat/images/stencil/500x659/products/6376/7351/30-2013__83638.1593796331.jpg?c=2 "AEM Fluid Temperature Sensor DTM-Style Kit. Includes 1/8\" NPT Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector & Pins
Accuracy: < 1.5°C / 2.7°F
Operating Temp: -20C to 150C / -4F to 302F
Resistive Range (Ω): See Instructions
Dissipation Constant: 12 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
Thermal Time Constant: 10 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
Sensor Body Material: Brass
Thread: 1/8\" NPT
Hex Size: 1/2\"
Installation Torque: 13.5Nm / 10 ft-lbs
Weight: 10g
Electrical Termination: Weatherproof High Performance DTM-Style connector. Includes Mating Connector, Pins & Wire Seals
Includes: Water Temp Sensor High Performance DTM-Style, 1/8\" NPT Alumium Bung, Mating Connector, Pins & Wire Seals")
